Symptom | Cause and/or corrective action |
|
The CD does not play, or “No disc” | The CD is dirty or defective. Clean it or change it. |
|
appears on the display when a CD | Check that the CD is inserted with the label side up |
|
is placed in the player. | (page 14). |
|
|
| |
| Moisture condensation has occurred. Leave the CD player |
|
| aside for several hours until the moisture evaporates. |
|
| Close the lid of the battery compartment firmly ( | page 12). |
| Make sure the batteries are inserted correctly ( | page 12). |
| Connect the AC power adaptor to an AC outlet securely |
|
| (page 13). |
|
| Press /ENTER after one second or more has passed since |
|
| the AC power adaptor was connected. |
|
| The |
|
| There is a problem with the quality of the |
|
| recording device, or application software. |
|
|
|
|
“HOLD” flashes on the display | The buttons are locked. Slide the HOLD switch back |
|
when you press a button, and the | (page 16). |
|
CD does not play. |
|
|
Playback starts from the point you stopped (resume function).
The resume function is working. To start play from the first
track, press and | hold | /ENTER until the first track starts | |
playing, or open | the lid of the player ( | page 14). Or, remove |
all power sources, and then insert the batteries or connect the AC power adaptor again.
During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally.
This player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. The player is not malfunctioning.
“NO FILE” appears on the display after you press /ENTER or when the lid of the player is locked.
There are no ATRAC3plus/ATRAC3/MP3 files on the CD.
A
The CD is dirty.
The LCD display becomes hard to see or slows down.
You are using your CD player at high temperatures (above 40°C/104°F) or at low temperatures (below 0°C/32°F). At room temperature, the display will return to its normal operating condition.
Play stopped abruptly. | The | off timer has been set. Change the setting of “TIMER” to |
| |
| “OFF” ( | page 21). |
| |
| The | dry batteries are used up completely. Replace the dry |
| |
| batteies with new LR6 (size AA) alkaline batteries ( | page | ||
| 11). |
|
|