Charging directly on the player
1Connect the AC power adaptor to the player.Charging starts and the lamp flashes in orange first, and then remains lit.
to DC IN 12V | lamp |
AC power adaptor
to an AC outlet
When the battery is completely charged,
the lamp turns red.
Charging time
Approximately 3 hours to charge an empty battery up to full capacity.
Checking the remaining power of the battery
When you press DISPLAY on the remote, the remaining power of the battery is indicated on the screen as shown below (page 37). As the black indicator section decreases, the remaining power is depleted further.
“LOW BATTERY”
Notes
•The display shows the approximate battery power remaining. One section does not always indicate
•Depending on the operating conditions, the display may increase or decrease relative to the actual power remaining.
•The remaining battery indicator appears only when the player is operated on the battery.
•The remaining battery indicator does not appear, while playing DivX files (page 26), JPEG files (page 29), and viewing external input signals (page 50).
Battery life *•When the battery is fully charged Approximately 3 hours
•If the screen is turned off (page 39) Approximately 7 hours
*Measured value using the JEITA (Japan Electronics and Information Technology Industries Association).
Playing time shown is approximate hours, when you use the player on a flat and stable surface. This value varies depending on how the player is used.
20