Using the Player with the Car Battery Cord
Connect the player to the cigarette lighter socket using the supplied car battery cord. (For the area code HK3, E18, MX2, E33, and AU4 models. You will find the area code of the model you purchased at the upper left side of the bar code on the package.)
To DC IN 12V
Car battery cord (supplied)
To a cigarette lighter socket
Notes
•Route the cords so that they will not interfere with driver.
•Do not install the player where viewable by the driver.
•Some states restrict the use of monitors and televisions in vehicles. Where use is permitted, the units should not be installed or operated so as to be viewable by the driver.
Remove Fuse
Plug end | Cigarette lighter plug |
If this cord is not working properly, check to see if the fuse has blown out.
If the fuse has blown out, replace it in the following way.
1Pull the cigarette lighter plug out of the cigarette lighter socket.
2Detach the end of the plug by turning it counter clockwise.
3Replace the fuse with a new one.
4Reattach the end of the plug by turning it clockwise firmly.
Notes
• | To replace the fuse on the car battery cord, be sure | Connection |
| anything for the specified fuse. | |
| to use a fuse with the correct amperage (3 A, 125 |
|
| V, length 20 mm). |
|
• | When replacing the fuse, do not substitute |
|
• | If the fuse blows again soon after replacement, |
|
| consult your nearest Sony dealer. |
|
Please contact your car dealer about the polarity that your car is grounded or the voltage of your car battery, etc.
51