1Before you start, make sure to back up any important data that is saved on the internal memory of your device to a memory card or other non-internal memory.

2 From your Home screen, tap .

3Find and tap Settings > Backup & reset > Factory data reset.

4To delete information, such as music and pictures, from your internal storage, mark the relevant checkbox.

5Tap Reset phone.

6If required, draw your screen unlock pattern, or enter your screen unlock password or PIN to continue.

7To confirm, tap Erase everything.

If you forget your screen unlock password, PIN or pattern in step 6, you can use the device repair feature in the PC Companion or Sony Bridge for Mac applications to erase this security layer. By running the repair feature, you are reinstalling software for your device and you may lose some personal data in the process.

Using your device in wet and dusty conditions

To ensure the water resistance of your device, all covers, including the covers for the micro USB port, the SIM card slot, and the memory card slot, must be firmly closed.

Your smart device is waterproof and dust-resistant in compliance with the Ingress Protection (IP) ratings IP65 and IP68, as explained in the table below. To view more specific IP information about your device, go to www.sonymobile.com/global-en/legal/ testresults/ and click on the relevant device name.

These specific IP ratings mean that your device is dust-resistant and is protected against low-pressure water streams as well as against the effects of immersion for 30 minutes in fresh (non-saline) water up to 1.5 meters deep.

You can use your device:

in dusty environments, for example, on a windy beach.

when your fingers are wet.

in some extreme weather conditions, for example, when it’s snowing or raining.

in fresh (non-saline) water depths of 1.5 meters or less, for example, in a fresh water lake or river.

in a chlorinated swimming pool.

Even if your device is resistant to dust and water, you should avoid exposing it unnecessarily to environments with excessive dust, sand, and mud or to moist environments with extreme high or low temperatures. The waterproof characteristic of the micro USB port, the SIM card slot, the memory card slot, and the headset jack cannot be guaranteed in all environments or conditions.

Never immerse your device in salt water or let the micro USB port or headset jack come into contact with salt water. For example, if you’re at the beach, remember to keep your device away from the sea water. Also, never expose the device to any liquid chemicals.

For example, if you’re washing dishes by hand using liquid detergent, avoid bringing your device into contact with the detergent. After exposure to non-fresh water, rinse your device using fresh water.

Normal wear and tear, along with damage to your device, can reduce its ability to resist dust or moisture. After using the device in water, dry off the areas around all covers, including the covers for the micro USB port, the SIM card slot, and the memory card slot.

If the speaker or microphone get wet, their function may be impacted until the water has completely dried. Please note that the drying time can be up to three hours depending on the environment. During this time, you can, however, use other features in the device that do not utilize the speaker or microphone. All compatible accessories, including batteries, chargers, hands-free devices, and micro USB cables, are not waterproof and dust-resistant on their own.

Your warranty does not cover damage or defects caused by abuse or improper use of your device (including use in environments where the relevant IP rating limitations are exceeded). If you have any further questions about the use of your products, refer to our Customer support service for help. Also, for warranty information, refer to the Important information which can be accessed via the Setup guide in your device.

129

This is an Internet version of this publication. © Print only for private use.

Page 129
Image 129
Sony D5803/D5833 Using your device in wet and dusty conditions, Find and tap Settings Backup & reset Factory data reset