102US
This function targets content via a USB
device, a home network, and Internet video.
xAuto
Select this to display 3D compatible content in
3D.
xOff
Select this to display all content in 2D.
This function targets content via a USB
device, a home network, and Internet video.
x16:9
Select this when connecting to a wide-screen
TV or a TV with a wide-mode function.
x4:3
Select this when connecting to a 4:3 screen TV
without a wide-mode function.
This function targets content via a USB
device, a home network, and Internet video.
xOriginal
Select this when connecting to a TV with a
wide-mode function. Displays a 4:3 screen
picture in 16:9 aspect ratio even on a wide-
screen TV.
xFixed Aspect Ratio
Changes the picture size to fit the screen size
with the original picture aspect ratio.
HDMI Settings
You can adjust the required settings for
equipment connected to the HDMI jacks.
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each input to which an HDMI input jack is
assigned independently.
x0 dB
xAuto
Automatically sets the level to 0 dB or +10 dB,
depending on the audio stream.
x+10 dB
Lets you turn the low-pass filter for the
subwoofer output on or off. The low-pass filter
works when PCM signals are input via an
HDMI connection. You can set the function for
each input to which an HDMI input jack is
assigned independently. Turn the function on
if you connect a subwoofer without the
crossover frequency function.
xOff
Does not activate the low-pass filter.
xOn
Always activates the low-pass filter with a
cutoff frequency of 120 Hz.
Lets you set the HDMI audio signals output
from the playback equipment connected to the
receiver via an HDMI connection.