103US
Adjusting Settings

xTV+AMP

The sound is output from the TV speaker and
the speakers connected to the receiver.
Notes
The sound quality of the playback equipment
depends on the TV’s sound quality, such as the
number of channels, and the sampling frequency,
etc. If the TV has stereo speakers, the sound output
from the receiver is also in stereo as that of the TV,
even if you play multi-channel source.
When you connect the receiver to a video
equipment (projector, etc.), sound may not be
output from the receiver. In this case, select
“AMP.
When you do not select an HDMI input jack as an
audio input in “Audio Input Assign” in the Input
Settings menu, sound is not output from the TV.

xAMP

The HDMI audio signals from the playback
equipment is only output to speakers
connected to the receiver. The multi-channel
sound can be played back as it is.
Note
When “Control for HDMI” is set to “On,” “Audio
Out” may be changed automatically.
Lets you turn the function which controls
equipment connected to the HDMI jack using
an HDMI cable on or off.
xOff
xOn
Lets you output HDMI signals to the TV even
when the receiver is in standby mode. For
details, see “Outputting the HDMI signals
even when the receiver is in standby mode
(Pass Through)” (page 80).
xOff
xOn

Input Settings

You can adjust the settings for the connections
of the receiver and other equipment.
Lets you set the following items for each input.

xWatch/Listen

Sets whether an input is displayed on the
Watch menu or the Listen menu.
Watch: Displays an input to the Watch menu.
Listen: Displays an input to the Listen menu.
Watch/Listen: Displays an input to both the
Watch and Listen menus.
Hidden: Does not display an input to both
the Watch and Listen menus. When you
select an input, you can skip an input which
is set to “Hidden.

xIcon

Sets the icon displayed on the Watch/Listen
menu.

xName

Sets the name displayed on the Watch/Listen
menu.
Note
You cannot select an input which is set to “Hidden,
or “HIDDEN” in “INPUT SKIP” in “INPUT”
(page 113) without using the GUI, even if you use
INPUT SELECTOR on the receiver.
Lets you set the audio input jack(s) assigned to
each input.
For details, see “Using other video/audio input
jacks” (page 82).

xHDMI

HDMI IN 1/2/3/4/5, none

xDigital

OPT IN 1/2/3/4, COAX IN 1/2, none

Control for HDMI

Pass Through

Input Edit

Audio Input Assign

continued