80US
You can also operate this function using the
TV menu. For details, refer to the operating
instructions of the TV.
Notes
When “Control for HDMI” is set to “On,” the
“Audio Out” settings in the HDMI Settings menu
will set automatically based on the System Audio
Control settings.
If the TV is turned on before turning on the
receiver, the TV will momentarily loose the sound
output.
If the TV is compatible with the Audio Return
Channel (ARC), an HDMI cable connection
also sends a digital audio signal from the TV to
the receiver. You do not need to make a
separate audio connection for listening to TV
sound from the receiver.
For details, see “Switching between digital
and analog audio” (page 81).
The optimum picture quality and sound field
are selected automatically according to the
scene selected on your TV.
For details on the operation, refer to the
operating instructions of the TV.
Note
The sound field may not switch depending on the
TV.

Correspondence table

If a “Home Theater Control”-compatible TV
is connected to the receiver, an icon for
Internet based applications appears on the
connected TV.
You can switch an input of the receiver or
switch sound fields by using your TV’s remote
control. You can also adjust the level of the
center speaker or the subwoofer, or adjust the
settings of “Sound Optimizer” (page 72),
“Dual Mono” (page 97), or “A/V Sync”
(page 98).
To use the Home Theater Control function,
your TV must be able to access a broadband
service.
For details, refer to the operating instructions
supplied with your TV.

Outputting the HDMI

signals even when the

receiver is in standby

mode

(Pass Through)

You can output the video and audio signals
from the HDMI IN jack to the TV connected to
the HDMI OUT jack even when the receiver is
in standby mode.
If you use this function while “Control for
HDMI” is set to “On,” the input of the receiver
is switched in accordance with the operation of
the connected equipment, even when the
receiver is in standby mode.
When you activate this function, make the
settings for “Pass Through” following the
steps below.
1Select “Settings” from the
home menu, then press .
2Select “HDMI Settings,” then
press .

Audio Return Channel (ARC)

Scene Select

Scene setting on the TV Sound field
Cinema HD-D.C.S.
Sports SPORTS
Music Live Concert
Animation A.F.D. Auto
Photo A.F.D. Auto
Game A.F.D. Auto
Graphics A.F.D. Auto

Home Theater Control