Resuming Playback from the Point Where You Stopped the Disc
When you stop the disc, the system remembers the point where you pressed x and “RESUME” appears on the front panel display. As long as you do not remove the disc, Resume Play will work even if the system enters standby mode by pressing 1.
>10 10/0
H 
x
Notes
•Depending on where you stopped the disc, the system may not resume playback from exactly the same point.
•The point where you stopped playing is cleared when:
–you turn the power off by pressing POWER on the system.
–you change the play mode.
–you change the setting on the Setup Menu.
1 While playing a disc, press x to stop playback.
“RESUME” appears on the front panel display, so you can restart the disc from the point where you stopped the disc.
If “RESUME” does not appear, Resume Play is not available.
2 Press H.
The system starts playback from the point where you stopped the disc in Step 1.
zTo play from the beginning of the disc, press x twice, then press H.