Controlling the TV
You can control your TV using the buttons below.
By pressing | You can |
TV [/1 | Turn the TV on or off. |
|
|
TV/VIDEO | Switch the TV’s input source |
| between the TV and other input |
| sources. |
|
|
Switching between TV and DVD
Using the COMMAND MODE DVD TV switch, you can switch the remote signal between control of the TV and control of the DVD unit. When you watch the DVD, ensure that you have the COMMAND MODE DVD TV switch set to DVD.
The table below shows the buttons that are affected by the COMMAND MODE DVD TV switch.
Button | DVD | TV |
1~9,* | Standard number | Selects the TV |
>10, | button function | Channels. |
10/0 | for DVD. |
|
|
|
|
ENTER | Standard enter | Confirms the |
| function for | selected channel. |
| DVD. | Occasionally you |
|
| may able to |
|
| select 12 channel |
|
| directly. |
|
| |
. Standard | TV CH – | |
| preceding title, |
|
| chapter skip |
|
| function for |
|
| DVD. |
|
>Standard forward TV CH + title, chapter
skip for DVD.
3 | VOL + | VOL + |
# | VOL – | VOL – |
|
|
|
Note
Depending on the TV, you may not be able to control your TV or to use some of the buttons above.
*For double digit number, press >10, then the number. (For example, press >10, then 2 and 5 for entering 25.)
Watching the Video or other Unit
You can use VCRs or other units connected to the VIDEO 1 or VIDEO 2 jacks. Refer to the operation manual supplied with the unit for further information on the operation.
1 2 3 FUNCTION
4 5 6
7 8 9
>10 10/0
Press FUNCTION repeatedly until |
| ||
| |||
VIDEO 1 or VIDEO 2 that you connected |
| ||
Other | |||
the unit to appears on the front panel | |||
| |||
display. |
| ||
Each time you press FUNCTION, the mode | Operations | ||
of the system changes in the following | |||
| |||
sequence. |
| ||
DVD t VIDEO 1 t VIDEO 2 t |
| ||
TUNER t DVD... |
| ||
|
|
|