SPEAKER FORMATION

Continue with AUTO CALIBRATION?

YES

NO

Note

In order to enjoy the surround sound after you change the position of the speakers, it is recommended you set [SPEAKER FORMATION], and then set [AUTO

CALIBRATION].To set [AUTO CALIBRATION], you need to connect the supplied calibration mic.

The front panel display indicates the selected [SPEAKER FORMATION]. It does not indicate the speakers which output sound.

When you change the [CONNECTION] setting in [SPEAKER SETUP], the [SPEAKER FORMATION] setting returns to [STANDARD].

Calibrating the

Appropriate Settings

Automatically

(AUTO CALIBRATION)

D. C. A. C. (Digital Cinema Auto Calibration) can set the appropriate surround sound automatically.

Note

Loud test sound is output when [AUTO CALIBRATION] starts. You cannot turn the volume down. Give consideration to children and neighbor.

1 Press FUNCTION repeatedly until “DVD” appears in the front panel display.

2 Press DISPLAY when the system is in stop mode.

The Control Menu display appears.

3 Press X/x to select [SPEAKER

FORMATION], then press .

1 ( 4 4 )

3 ( 2 8 )

DVD VIDEO

T

0 :

0 3 : 0 4

SPEAKER FORMATION

SPEAKER FORMATION

AUTO CALIBRATION

4 Press X/x to select [AUTO

CALIBRATION], then press .

The options for [AUTO CALIBRATION] appear.

AUTO CALIBRATION

Connect calibration mic. Start measurement?

YES

NO

Connect the calibration mic to the A.CAL MIC jack on the front panel, and set it up at the ear level using a tripod, etc. (not supplied). The front of each speaker should

64GB