Note

•When you change the [CONNECTION] setting, the [SPEAKER FORMATION] setting returns to [STANDARD].

x[DISTANCE (FRONT)]

The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using the Quick Setup (page 14), the settings is automatically displayed.

1.0 - 7.0 m3)/

0.0- 7.0 m2)/ 0 - 23 ft

Be sure to change the value in the Setup Display when you move the speakers.

3 - 23 ft 0.0 - 7.0 m2)/ 0 - 23 ft

[L/R]

3.0m/10 ft1) (appears when you set [SURROUND] to [YES] in the

[CONNECTION]

setting.)

Surround speakers distance can be moved up to 5.0 meters (16 ft) closer to the listening position from the front speaker distance.

Be sure to change the value in the Setup Display when you move the speakers.

[L/R]

Front speaker distance from the

3.0 m/10 ft1)

listening position can be set from

 

1.0 to 7.0 meters3) (3 to 23 ft).

1)When you perform the Quick Setup (page 14), the default settings are changed.

2)0.0 to 6.9 meters for North American models.

Note

• If all front and surround speakers are not placed at an

equal distance from your listening position, set the

[CENTER]

3.0m/10 ft1) (appears when you set [CENTER] to [YES] in the

[CONNECTION]

setting.)

Center speaker distance can be moved up to 1.6 meters (5 ft) closer to the listening position from the front speaker distance.

distance according to the closest speaker.

• Do not place the surround speakers farther away from

your listening position than the front speakers.

• Depending on the input stream, the [DISTANCE]

setting may not be effective.

x[LEVEL (FRONT)]You can vary the level of front speakers as

1)When you perform the Quick Setup (page 14), the default settings are changed.

2)0.0 to 6.9 meters for North American models.

3)0.9 to 6.9 meters for North American models.

x[DISTANCE (SURROUND)]

The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using the Quick Setup (page 14), the settings is automatically displayed.

follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L/R]

Set this between –6.0 dB and

0.0 dB

0.0 dB.

 

 

[CENTER]

Set this between –6.0 dB and

0.0 dB

+6.0 dB.

(appears when you

 

set [CENTER] to

 

[YES] in the

 

[CONNECTION]

 

setting.)

 

 

 

72GB