Sony DAV-DZ300 Enjoying the Sound of Other Components, 68GB, Selecting the connected component, tSAT t AUDIO t DVD t …, DVD t TUNER FM t TUNER AM t TV

Note

• This function is only for SONY TVs. (This function

may not work on some SONY TVs.)

• If distance between TV and this system is too far, this

function may not work. Install the system near the

TV.

• Keep the remote pointed in the direction of the TV

and this system while entering the code.

Enjoying the Sound of Other Components

AMP MENU

X/x/c

ENTER

FUNCTION

Selecting the connected component

You can use a VCR or other components connected to the SAT jacks on the rear panel or AUDIO IN jack on the front panel. Refer to the operation manual supplied with the components for further information on the operation.

Press FUNCTION repeatedly until “SAT” or “AUDIO” appears in the front panel display.

Each time you press FUNCTION, the mode of the system changes in the following sequence.

DVD t TUNER FM t TUNER AM t TVtSAT t AUDIO t DVD t …

Changing the output level of the sound from the AUDIO IN jack on the front panel

Depending on the component, distortion occurs because of the input level when listening to the component that is connected to the AUDIO IN jack on the front panel.

To prevent this, you can change the output level of the sound from the AUDIO IN jack on the front panel.

68GB