Sony DAV-DZ111, DAV-DZ410 aWall, Installing the Speakers on, 23GB, Getting, ADVANCED, 2 Fasten the screws to the wall, Hang the speakers on the screws

Installing the Speakers on

aWall

1Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below.

4 mm (5/32 inch)

30 mm (1 3/16 inch)

Hole on the back of

4.6 mm the speaker (3/16 inch)

10 mm

(13/32 inch)

2 Fasten the screws to the wall.

For the center speaker

160 mm (6 3/8 inch)

8 to 10 mm

(11/32 to 13/32 inch)

For the other speakers (DAV-DZ110/ DZ111)

8 to 10 mm

(11/32 to 13/32 inch)

For the other speakers (DAV-DZ410)

	400 mm			Getting
	(15	3/	inch)
		4
	8 to 10 mm			–Started
	(11/32 to 13/32 inch)
				ADVANCED
3	(3/16 inch)
	Hang the speakers on the screws.
	4.6 mm
	10 mm			–
	(13/32 inch)

Note

•Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied.

•Contact a screw shop or installer regarding the wall material or screws to be used.

•Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.

23GB