Step 4: Performing the Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the system.

"/1

C/X/x/c

ENTER

DISPLAY

1 Turn on the TV.2 Press [/1.

Note

Disconnect the headphones when you perform the Quick Setup. You cannot operate steps after 12 with the headphones connected.

Make sure that the function is set to “DVD.”

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the screen. If this message does not appear, display the Quick Setup and perform again (page 21).

4 Press ENTER without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

5 Press X/x to select a language.The system displays the menu and subtitles in the selected language.6 Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

 

SCREEN SETUP

 

 

 

TV TYPE:

16:9

 

 

SCREEN SAVER:

16:9

 

 

BACKGROUND:

4:3 LETTER BOX

 

 

LINE:

4:3 PAN SCAN

 

 

4:3 OUTPUT:

FULL

 

 

 

 

 

 

 

 

7 Press X/x to select the setting that matches your TV type.xIf you have a 4:3 standard TV[4:3 LETTER BOX] or [4:3 PAN SCAN] (page 72)xIf you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode[16:9] (page 72)8 Press ENTER.

The Setup Display for selecting the output method for video signals from the EURO AV T OUTPUT (TO TV) jack on the rear panel of the system appears.

SCREEN SETUP

TV TYPE:

16:9

SCREEN SAVER:

ON

BACKGROUND:

JACKET PICTURE

LINE:

VIDEO

4:3 OUTPUT:

VIDEO

 

RGB

 

 

9 Press X/x to select the output method for video signals.

continued

– BASIC – Started Getting

19GB