Step 1: Assembling the Speakers

Before connecting the speakers, attach the speaker stand to the speaker. About how to connect the speaker cords to the SPEAKER jacks, see page 15. (For the speakers of DAV-DZ410 only.)

Note

• Spread a cloth on the floor to avoid damaging the floor.

Tip

• You can use the speaker without the speaker stand by installing it on the wall (page 23).

1 Secure the post to the base.The long post is for floor use, the short post is for tabletop use.

Post (long)

or

Post (short)

 

Base

2 Draw the speaker cord through the hole on the base, then stand it up.

Bottom of the base

,

Speaker cord

– BASIC – Started Gettingcontinued

9GB