face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. Be quiet during the measurement.

A.CAL MIC

Calibration mic

5 Press X/x to select [YES], then press

ENTER.

Calibration starts.

Measuring. Please wait a moment.

Note

•Avoid being in the measurement area and making noise during the measurement (about 3 minutes), to avoid measurement failure. During the measurement, test signals are output from the speakers.

•Reflections from walls or the floor may affect measurements.

•If an error message appears, follow the message, then select [YES].

An error message appears when: –the headphones are connected.

–the calibration mic is not connected. –front speakers are not correctly connected. –surround speakers are not correctly connected. –front and surround speakers are not correctly

connected.

–there is excessive noise around the calibration mic.

–the calibration mic is overloaded.

6 Press C/X/x/c to select [YES] or [NO], then press ENTER.xThe measurement is OK.Disconnect the calibration mic, then select [YES]. The result is implemented.

Measurement complete.

FRONT L :

YES

FRONT R :

YES

CENTER :

NONE

SUBWOOFER :

YES

SURROUND L :

NONE

SURROUND R : NONE

If OK, unplug calibration mic and select

YES.

YES

NO

 

xThe measurement is not OK.Follow the message, then select [YES] to retry.

Measurement failure.

Check speaker connection.

Retry?

YES

NO

Tip

•You can check the distance between the listening position and each speaker. See page 75.

Note

•While the Auto Calibration function works:

–do not turn off the power.

–do not press any button.

–do not change the volume.

–do not change the function.

continued

Adjustments and Settings Advanced
69GB