Sony DAV-DZ830W 27GB, Stand ADVANCED –, IR transmitterGetting Started–, Installing the IR transmitter on a wall, 1Rotate the stand of the IR transmitter

Installing the IR transmitter on a wallYou can hang the IR transmitter on a wall when:

–there is an obstruction between the IR transmitter and IR receiver of the surround speaker (L).

–people often pass between the IR transmitter and IR receiver of the surround speaker (L).

When hanging both the IR transmitter and surround speaker (L), adjust the position of the IR transmitter after deciding the position of the surround speaker (L).

1Rotate the stand of the IR transmitter.

IR transmitter

Stand

2Install two commercially available screws in the wall so that it protrudes 4 mm (3/16 inch).

Install the screws 30 mm (1 3/16 inches) apart.

30 mm

(1 3/16 inches)

4 mm (3/16 inch)

3Hang the IR transmitter via the holes on the bottom of the stand on the screws.

Make sure that the IR transmitter does not move after installation.IR transmitterGetting Started–Stand ADVANCED –

Tip

•You can store the cords in the troughs in the bottom of the stand.

Stand

Troughs

Note

•Use screws suitable for the material and strength of the wall.

•Do not install the IR transmitter to a wall of low strength.

•Sony is not liable for any damage or accident incurred by incorrect installation (i.e. wall of low strength, etc.), incorrect use of this product, or natural disaster.

•When connecting/disconnecting the cord, detach the IR transmitter from the wall first.

27GB