Installation and Upgrade
driver location as "\Drivers\WinMe\LAN". Click Next to begin searching the driver.
5.The Add New Hardware will found Intel PRO PCI Adapter... Click Next to continue the driver installation.
6.Click Finish button to finish installing LAN driver.
7.Click Yes to restart the computer
Installing Internal LAN for Windows 2000
1.Click the Start button, then point to Settings, and click Control Panel.
2.
3.Under the Other Devices line, you will find the Ethernet Controller, then Scan for hardware changes buttons to appear the New Hardware Found Message Box.
4.In the Found New Hardware Wizard message box which shows searching Ethernet Controller driver. Click Next to proceed to the next step.
5.Select "Search for a suitable driver for my device", and click Next.
6.Tick on "Specify a location box". Then, click Next and Browse buttons and navigate to the LAN driver location as "\Drivers\Win2K\LAN". Click OK and Next to begin searching the driver.
7.The Add New Hardware will found Intel (R) PRO 100B PCI Adapter. Click Yes to continue installing the driver.
8.Click Finish button to finish installing LAN driver.
2.2.10Installing Internal Modem and LAN Combo Device Driver
If your notebook has installed
For Modem driver, please follow the procedures below for installing the Lucent Data Fax Modem driver:
Installing Modem Driver of Combo Device for Windows 98 / Me / 2000
1.Boot Windows from your hard disk and insert the disc containing the Modem driver for Windows.
2.Click the Start button and then click Run. In the Run dialog box, click Browse button and navigate to the directory as "\driver\Win98\MODEM\setup.exe" where the modem driver is located. . Please change "Win98" to other path named as WinMe, Win2K… to fit the operating system you are using.
3.Click OK to process the installation of modem driver. Follow the instruction to finish the installation.
4.With “Yes, I want to restart my computer now” selected, click Finish to complete the modem installation.
FIC A360 Service Manual |
