FIC A360 service manual Hardware Functional Overview

Hardware Functional Overview

and the R3 card support is fully compliant with the 2000 PC Card Standard CardBus specification. The OZ6933 is an additional buffer chip for the PC Card socket interface. In Addition, the OZ6933 supports dynamic PC Card hot insertion and removal, with auto configuration capabilities.

The OZ6933 is fully complains with the 33Mhz PCI Bus specification, v2.2. It supports a master device with internal CardBus direct data transfer. The OZ6933 implements FIFO data buffer architecture between the PCI bus and CardBus socket interface to enhance data transfers to CardBus Devices. The bi-directional FIFO buffer permits the OZ6933 to accept data from a target bus (PCI or CardBus interface) while simultaneously transferring data. This architecture not only speeds up data transfers but also prevents system deadlocks.

The OZ6933 is a PCMCIA R2/CardBus controller, providing the most advanced design flexibility for PC Cards that interface with advanced notebook designs.

FEATURES - Dual Slot Solution OZ6933

•Supports 2 PCMCIA 2.1 and JEIDA 4.2 R2 cards or 2 CardBus cards

•ACPI-PCI Bus Power Management Interface Specification Rev 1.1 Compliant

•Supports OnNow LAN wakeup, OnNow Ring Indicate, PCI CLKRUN#, PME#, and CardBus CCLKRUN#

•Compliant with the 33Mhz PCI Specification V2.2, 2000 PC Card Standard 7.1 for OZ6933

•Yenta™ PCI to PCMCIA CardBus Bridge register compatible

•ExCA (Exchangeable Card Architecture) compatible registers map-able in memory and I/O space

•Intel™ 82365SL PCIC Register Compatible

•Supports PCMCIA_ATA Specification

•Supports 5V/3.3V PC and 3.3V Cardbus cards

•Supports two PC Card or CardBus slots with hot insertion and removal

•Supports multiple FIFOs for PCI/CardBus data transfer

•Supports Direct Memory Access for PC/PCI and PCI/Way on PC Card socket

•Programmable interrupt protocol: PCI, PCI+ISA, PCI/Way, or PC/PCI interrupt signaling modes

•Win'98 IRQ and PC-98/99 compliant

•Parallel or Serial interface for socket power control devices including Micrel and TI

•Integrated PC 98/99 -Subsystem Vendor ID support, with auto lock bit

•LED Activity Pins

4-12 FIC A360 Service Manual