FIC service manual Software Functional Overview, 3-46, FIC A360 Service Manual

Software Functional Overview

Function	Address	Register	R/			Bit Number						Logic
		Name	W	7	6	5	4	3	2	1	0

				E	B	P
				C	A O
		PMU	R/	_	Y W		-
	E0h			RES[7:3] R	_	_
		_CONT	W
				E	L L
				G E E
					D D
PMU
control						O
		ACPI	R/			S
						_	-
	E1h	_ACC		RES [7:1]
			W			S
		_ENB
						T
						S
	E2h	OFF	R/	DATA [7:0]			-
		_TIME	W
		POLLING_	R/			R
	E3h			Slave Address [6:0]		E
		ADDRESS	W
						S
							Signed
	E4h	HIGH_	R/	DATA [7:0]
		ALARM	W				value
	E5h	LOW	R/	DATA [7:0]			Signed
		_ALARM	W				value
	E6h	POLLING	R/	DATA [7:0]
		_INTERVAL	W
Thermal
		POLLING	R(/				Signed
Sensor	E7h			DATA [7:0]
		_DATA	W)				value
Polling
	E8h	HARDWARE_	R/	DATA [7:0]			Signed
		SHUT_DOWN	W				value
	E9h	POLLING	R/	DATA [7:0]
		_COMMAND	W
	EAh	RETRY	R/	DATA [7:0]
		_COUNT	W
	Ebh To	Reserved	R/	Don't care
	EFh		W
	F0h	BURST	R/	DATA [7:0]			-
		_FLG_CLR	W
PMU
control	F1h To	Reserved	R/	Don't care
	FFh		W

Default		Description
			PMU does not
			initialize EC register
		EC_REG =1:	when system powe
			is off.
		BAY_LED =1: PMU indicates the
0x00			Battery discharge
			status to the
			LED_BAY#n,
		POW_LED =1: when the battery is
			installed. The
			Power LED blink
0x00		OS_STS = 1:	ACPI mode
	= 0:		Legacy mode
		Power switch over ride function
0x64		timer
		01h-FFh (0.1-25.5esc step
		0.1sec)
		00h : Reserved
		Address: 0x00-0x7F
0x00		The polling slave address setting
		If this address is 00, the Polling is
		disabled.
0x00		If the received data GE this value,
		the event will be detected.
0x00		If the received data LE this value,
		the event will be detected.
		0x00 :Polling disable
0x00		0x01 – 0xFF [x 250ms] (250ms to
		63.75sec)
0x00		This register shows data at latest
		polling.
		If the thermal sensor read value
0x7D		GE this value, the PMU
		automatically off the power.
0x00		Polling command (data register)
		address.
0x10		0x00 - 0xFF: Retry count value (0-
	255)

After writing to the register

-addressed A8h-AFh,

Set the 00h to this register.

R(/W): This is the read only register, but the written data will be able to read back till PMU updates the data periodically, or PMU detects the status change.

3-46 FIC A360 Service Manual