| Chapter |
|
Maintenance & Disassembly | 5 |
|
|
|
|
5.1Introduction
This section contains preventive and corrective maintenance procedures for the A360 notebook. The first part of the section describes the computer cleaning procedures and preferred handling procedures for sensitive components (e.g. disk drives, LCD, CPU, batteries).
The second part of the chapter identifies all field replaceable parts with the remainder explaining the removal and replacement procedures for the field replaceable parts.
5.2Preventive Maintenance
Preventive maintenance is limited to cleaning the plastic case, the keyboard, and the display screen and cleaning the floppy drive heads as required.
5.2.1Cleaning the Computer
When it is necessary to clean the plastic case and keyboard, use a soft
Never use alcohol,
5.2.2Protecting the Disk Drives
To protect the disk drives and data, back up the system disk periodically on floppy diskettes. Periodically use a
5.2.3Maintaining the LCD Quality
When it comes to screen problems, heat plays a big part. After a good working session, the typical routine is to shut the machine and close the cover. But the display surface - no matter what type it is - and the components inside the computer radiates heat; when you close the cover, you trap the heat against the screen. Leave the computer's cover open for about ten minutes while the heat disperses. Make this a habit.
FIC A360 Service Manual |