FIC A360 service manual Software Functional Overview, The register type is word

Software Functional Overview

Function	Address	Register	R/W			Bit Number
		Name		7	6	5	4	3	2	1	0
									C	C	D
	1Ah	Battery		DATA[15:3] *1					R		C
	*3	State	R(/W)	All bits are 0					I	H	H
									T	G	G
1st
	1Ch	Battery
Battery		Present	R(/W)			DATA[15:0] *1
	*3
[ _BST ]		rate
	1Eh	Battery	R(/W)			DATA[15:0] *1
		Remaining
	*3
		Capacity
	20h	Battery
		present	R(/W)			DATA[15:0] *1
	*3
		Voltage
1st		Battery
Battery	22h		R/W			DATA[15:0] *1
		Trip Point
[ _BTP ]
2nd
Battery	24h to	*2	*2				*2
[ _BIF ]	3Ch *3
2nd	3Eh to
Battery		*2	*2				*2
	44h *3
[ _BST ]
2nd
Battery	46h	*2	*2				*2
[ _BTP ]
-		Battery
	48h	data	R(/W)			DATA[7:0]
		Size
1st	49h	Design	R(/W)		DATA[23:16] *1 *7
		capacity
Battery
		Last Full
[_BIF]	4Ah		R(/W)		DATA[23:16] *1 *7
		Charge
		Capacity
1st	4Bh	Battery	R(/W)		DATA[23:16] *1 *7
Battery		Remaining
[_BST]		Capacity
1st	4Ch	Battery	R(/W)		DATA[23:16] *1 *7
Battery		Trip
[_BTP]		Point
2nd	4Dh	Design	R(/W)		DATA[23:16] *1 *7
		capacity
Battery		Last Full
[_BIF]	4Eh	Charge	R/(/W)		DATA[23:16] *1 *7
		Capacity
2nd		Battery
Battery	4Fh	Remaing	R(/W)		DATA[23:16] *1 *7
[_BST]		Capacity
2nd		Battery
Battery	50h	Trip	R(/W)		DATA[23:16] *1 *7
[_BTP]		Point
	51h to	Reserved	R/W			Don’t care
	6Bh *3

Logic		Default	Description
				The battery is
			DCHG=1:	discharged
-	-			The battery is
			CHG =1 :	charged
			CRIT =1 :
				The battery is critical
				(Empty)

-0xffff 0x0000-0xfffe(mW) 0xffff: Unknown

-0xffff 0x0000-0xfffe(mWh) 0xffff: Unknown

-0xffff 0x0000-0xfffe(mV) 0xffff: Unknown

-0x000 0x0000 :Clear the trip point

0 0x0001-0xffff(mWh)

*2	*2	*2
*2	*2	*2
*2	*2	*2
		0x01 : DATA size is
-	-	3byte.(PMU06A)
		0x00 :DATA size is 2 byte.
		(PMU06) *8
-	0xff	PMU06A use this data with
		02/03h. *7 *8
-	0xff	PMU06A use this data with
		04/05h. *7 *8
-	0xff	PMU06A use this data with
		1E/1Fh. *7 *8
-	0x00	PMU06A use this data with
		22/23h. *7 *8
-	0xff	PMU06A use this data with
		26/27h. *7 *8
-	0xff	PMU06A use this data with
		28/29h. *7 *8
-	0xff	PMU06A use this data with
		42/43h. *7 *8
	0x00	PMU06A use this data with
		46/47h. *7 *8
-	-

*1:	The register type is word.
*2:	Same as 1st Battery CMBatt Data.
*3:	This register is not cleared if the system is in S4-S5 state.
R(/W):	This is the read only register, but the written data will be able to read back till PMU
	updates the data periodically, or PMU detects the status change.

3-40 FIC A360 Service Manual