FIC A360 Removing the CPU, Removing the CD-ROM Module, Maintenance & Disassembly, 12 Remove CPU

Maintenance & Disassembly

5.5.7Removing the CPU

1.For doing this disassembly, you need first to do the disassembly for the keyboard cover, keyboard, and heat sink plate.

2.Use a flat screw driver and insert it into the CPU socket and tilt it towards in front of you to unlock CPU from the socket. It’s recommended to use the protective tooling securing CPU against damage.

Insert flat screw driver into the CPU socket. To unlock CPU, Tilt it in front of you.

CPU Protective

Tooling

Figure 5-12 Remove CPU

5.5.8Removing the CD-ROM Module

The procedure for removing and replacing the CD-ROM module is as follows:

1.Before removing the CD-ROM module, you need to disassemble keyboard first.

2.To remove the CD-ROM module, remove one screw securing the CD-ROM bracket and push out the drive from the connector.

FIC A360 Service Manual 5-11