Using the Video or Other Unit
You can use VCRs or other units connected to the VIDEO jacks. Refer to the operation manual supplied with the unit for further information on the operation.
MENU
1 2 3
4 5 6
7 8 9 
FUNCTION
>10 10/0
ENTER
Press FUNCTION repeatedly until VIDEO appears in the front panel display.Each time you press FUNCTION, the mode of the system changes in the following sequence. TUNER FM t TUNER AM t VIDEO t TV* t DVD t TUNER FM t ...
*When selecting the TV, TV sound is output. When connecting to TV only using the SCART jack, no sound is output from TV.
To use a digital satellite receiver or other components with a high audio output level
Connect the satellite receiver to the VIDEO IN jack of this system. You can also connect the components with a high audio output level (including 2V r.m.s components, such as MD, etc.) to the VIDEO IN jack, and set the following procedure to prevent distortion occurring.
1Press MENU when the function is VIDEO. “SAT” flashes in the front panel display.
2Press ENTER while “SAT” flashes.
Tip
To return to the VIDEO function, do the same procedure above.
Enjoying the Radio
Presetting Radio StationsYou can preset 20 FM stations, and 10 AM stations.
Before tuning, make sure to turn down the volume to minimum.
|
|
| "/1 |
MENU |
|
|
|
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | FUNCTION |
|
|
| |
>10 | 10/0 |
| TUNER/ |
|
|
| BAND |
PRESET |
|
| TUNING |
C/X/x/c
ENTER
1 Press TUNER/BAND repeatedly until the band you want appears in the front panel display.
Each time you press TUNER/BAND, the band toggles beween FM and AM.
2 Press and hold TUNING + or – until “AUTO” appears in the front panel display, then release.
Scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for stereo program) appear in the front panel display.
PGM JPEG VCD MP3 TITLE TRK ALBM CHAP MULTI PBC NTSC NIGHT DDSG | PROLOGIC | |
ALBM AUTO |
| DIGITAL |
SHUF MONO | kHz | MUTING |
REP1 TUNED STEREO | MHz | SLEEP |
“MEMORY” appears in the front panel display.