Sony DAV-EA20 62GB, Press, Press, Press, Press, Press, ENTER, xLEVEL, xBALANCE, xTEST TONE, TONE,” then press ENTER, TONE,” then press ENTER, repeatedly to select “TEST

value of “BALANCE” and “LEVEL” using C/X/x/c.

When adjusting “BALANCE,” the test tone is emitted from both the left and right speakers at the same time, and when adjusting “LEVEL,” the test tone is emitted from only the selected speaker.

6 Press ENTER when you have finished making adjustments.

7 Press X or x repeatedly to select “TEST

TONE,” then press ENTER.

8 Press X or x repeatedly to select “OFF,” then press ENTER.

Note

When you adjust the speaker settings, the sound cuts off for a moment.

Tip

To adjust the balance or the level without listening to the test tone, select “BALANCE” or “LEVEL” in step 3 and press ENTER. Then adjust the balance or level using X/x and press ENTER.

From your listening position, adjust the

3 Press X or x repeatedly to select “TEST

TONE,” then press ENTER.

4 Press X or x repeatedly to select “ON,” then press ENTER.

You will hear the test tone from each speaker in sequence.

The Setup Display appears.

Press DVD SETUP in stop mode.

2 Press X or x repeatedly to select “SPEAKER SETUP,” then press

ENTER.

Adjusting the speaker balance and level by using the test tone

xLEVEL

You can vary the level of each speaker as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.

	CENTER	Adjusts the level of the center
	0 dB	speaker (–6 dB to +6 dB, 1 dB
		increments).

	SURROUND	Adjusts the level of the surround
	LEFT 0 dB	speakers (–6 dB to +6 dB, 1 dB
	SURROUND	increments).
	RIGHT 0 dB	increments).
	RIGHT 0 dB

	SUBWOOFER	Adjusts the level of the subwoofer
	0 dB	(–6 dB to +6 dB, 1 dB increments).

xBALANCE

You can vary the balance of the left and right speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.

FRONT Adjusts the balance between the front left and right speakers. The center position is shown as “---”. (You can adjust from the center 6 steps left or right.)

To adjust the volume of all the speakers at one time

Use the VOLUME control on the system, or press VOL +/–.

xTEST TONE

The speakers will emit a test tone to adjust “LEVEL” and “BALANCE.”

OFF The test tone is not emitted from the speakers.

ON The test tone is emitted from both the left and right speakers simultaneously while adjusting level or balance. When you select one of the “SPEAKER SETUP” items, the test tone is emitted from each speaker in sequence.