Sony DAV-FX10 manual About DVD 5-DISC changer, 32US, Additional operations

Additional operations

To	Press
Stop	x
Pause	X
Resume play after pause	X or H
Go to the next chapter,	> (except for JPEG)
track, or scene
Go back to the preceding	. (except for JPEG)
chapter, track, or scene
Mute the sound	MUTING. To cancel
	muting, press it again
	or VOLUME + to
	adjust the sound
	volume.
Change a disc while playing	DISC SKIP
another disc
Play the desired disc directly	DISC 1-5 on the
	system.
Stop play and remove the	DISC 1-5 and A on the
desired disc	system.
Replay the previous scene*1	(instant
	replay) during
	playback.
Briefly fast forward the	(instant
current scene*2	advance) during
	playback.
Go to the next or previous	ALBUM + or – during
album*3	playback.

*1 DVD VIDEOs/DVD-RWs/DVD-Rs only.

*2 DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs only.

*3 DATA CDs only.

Note

•If there is no disc in the system, “No Disc” appears in the front panel display.

•The Instant Replay function is useful when you want to review a scene or dialogue that you missed.

•The Instant Advance function is useful when you want to pass over a scene that you don’t want to watch.

•You may not be able to use the Instant Replay or Instant Advance function with some scenes.

About DVD 5-DISC changer

	Stocker
Disc	DISC 1
	DISC 2
DISC 3	DISC 4
	DISC 5

Playing unit

The disc changer consists of a playing unit and a stocker which transports the discs to the disc slot and the playing unit.

For example, if you press DISC 3, the stocker moves until the DISC 3 comes to the position of the playing unit and then moves the DISC 3 over the playing unit.

Note

•Do not insert discs while playing.

•Noise may come from the disc changer when changing discs or turning the system on and off. However, this is just noise produced by the operation of the internal mechanisms and does not indicate a malfunction.

•8 cm (3-inch) CDs or DVDs cannot be stored in the stocker.

Do not insert an 8 cm (3-inch) CD with an 8 cm (3- inch) adapter. It may damage the system and disc.

Resuming playback from the point where you stopped the disc (Resume Play)

When you stop the disc, the system remembers the point where you pressed x and “Resume” appears in the front panel display. As long as you do not remove the disc, Resume Play will work even if the system enters standby mode by pressing "/1.

1 While playing a disc, press x to stop playback.

“Resume” appears in the front panel display, so you can restart the disc from the point where you stopped the disc.

32US