Sony DAV-FX10 manual Operating for the Theatre Sync function, 66US, To change the transmit time

By pressing		Number	TV’s input source
TV/VIDEO	0		No input source
			(Default)
	1		VIDEO1
	2		VIDEO2
	3		VIDEO3
	4		VIDEO4
	5		VIDEO5
	6		VIDEO6
	7		VIDEO7
	8		VIDEO8
	9*		COMPONENT 1
			INPUT
		CLEAR*	COMPONENT 2
			INPUT
		ALBUM –* COMPONENT 3
			INPUT
		ALBUM +*	COMPONENT 4
			INPUT

* Except for North American models.

Operating for the THEATRE SYNC function

Point the remote to the direction of TV and this system, then press THEATRE SYNC once.

While transmitting the code from the remote, the TV button flashes.

If this function does not work, change the transmit time. The transmit time varies depending on the TV.

To change the transmit time

Press and hold TV CH + while entering the code for transmit time (see the table) using the number buttons.

The transmit time from the remote is selected. If you successfully set the transmit time code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes 5 times quickly.

By pressing	Number	Transmit time
TV CH +	1	0.5 (Default)
	2	1
	3	1.5
	4	2

By pressing Number Transmit time

52.5

63

73.5

84

Note

•This function is only for SONY TVs. (This function may not work on some SONY TVs.)

•If distance between TV and this system is too far, this function may not work. Install the system near the TV.

•Keep the remote pointed in the direction of the TV and this system while the TV button is flashing.

66US