Sony DAV-S400 manual 27GB, xLEVEL, Other AMP MENU settings, xDIMMER, xMEMO. CLR, Getting Started

Models: DAV-S400

1 80
Download 80 pages 63.51 Kb
Page 27
Image 27
xLEVEL

xLEVEL

You can vary the level of each speaker as follows. The default settings are underlined.

C. LEVEL 0 dB (centre speaker level)

Adjust the level of the centre speaker (You can adjust from –6 dB to +6 dB in 1 dB steps).

R. LEVEL 0 dB (rear speakers level)

Adjust the level of the rear speakers (You can adjust from –6 dB to +6 dB in 1 dB steps).

S. W. LEV. 0 dB (subwoofer level)

Adjust the level of the subwoofer (You can adjust from –6 dB to +6 dB in 1 dB steps).

Notes

When you select an item, the sound cuts off for a moment.

Depending on the settings of other speakers, the subwoofer may output excessive sound.

To adjust the volume of all the speakers at one time

Use the VOLUME control on the system or press VOL +/–.

Other AMP MENU settings

You can control the brightness of the front panel display, clear the preset stations and the station names, and set the speaker parameters back to the default setting. Press AMP MENU repeatedly to display 9 CUSTOMIZE. Use X/x to select the following items and C/c to adjust the settings.

xDIMMER

You can change the brightness of the front panel display by two ways. Use C/c to adjust the settings or press DIMMER.

xMEMO. CLR.

N (No): Skip back to previous menu.

Y (Yes): If you select Y by pressing ENTER, “Really? N” and “Really? Y” appears.

If you select “Really? Y” by pressing ENTER, “ALL CLEAR!” is displayed and all settings such as preset stations and station names will be cleared, and speaker parameters will be reset to their default settings.

Getting Started

27GB

DAV-S400 4-240-074-12(1)

Page 27
Image 27
Sony DAV-S400 manual 27GB, xLEVEL, Other AMP MENU settings, xDIMMER, xMEMO. CLR, Getting Started