Naming Preset Stations
You can enter a name of up to 8 characters for preset stations. These names (for example, “XYZ”) appear in the system’s front panel display when a station is selected.
Note that no more than one name can be entered for each preset station.
3 Press NAME.
4 Create an index name by using the cursor buttons:
Press x/X to select a character, then press c to move the cursor to the next position.
If you make a mistake
NAME
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
>10 | 10/0 |
|
FUNCTION
C/X/x/c
ENTER
Press C or c repeatedly until the character to be changed flashes, then press x/X to select the right character.
5 Press ENTER.
To assign index names to other
stations
Repeat Steps 2 to 5.
1 Press FUNCTION repeatedly until TUNER appears on the front panel display.
The last station you received is tuned in.
Each time you press FUNCTION, the mode of the system changes in the following sequence:
DVD t AUDIO 1 t AUDIO 2 t TUNER t DVD...
2 Tune in the preset station you want to create an index name for.
If you are not familiar with how to tune in preset stations, see “Listening to the Radio” on page 58.
