Sony DAV-S800 Watching the Video or other Unit

Controlling the TV

You can control your TV using the buttons below.

By pressing	You can
TV [/1	Turn the TV on or off.
TV/VIDEO	Switch the TV’s input source
	between the TV and other input
	sources.

Switching between TV and DVD

Using the CONTROL DVD/TV switch, you can switch the remote signal between control of the TV and control of the DVD unit. When you watch the DVD, ensure that you have the CONTROL DVD/TV switch set to DVD.

The table below shows the buttons that are affected by the CONTROL DVD/TV switch.

Button	DVD	TV
1~9,**	Standard number	Regardless of
>10,	button function	the number
10/0	for DVD.	button pressed,
		the channel
		advances in
		numerical order.
ENTER	Standard enter	Skips to channel
	function for	12.
	DVD.
. Standard		CH –
	preceding title,
	chapter skip
	function for
	DVD.
>	Standard forward	CH +
	title, chapter
	skip for DVD.
3	VOL +	VOL +
#	VOL –	VOL –

Note

Depending on the TV, you may not be able to control your TV or to use some of the buttons above.

*Use the number buttons only to enter the code number of controllable TVs.

**For double digit number, press >10, then the number. (For example, press >10, then 2 and 5 for entering 25.)

Watching the Video or other Unit

You can use VCRs or other units connected to the VIDEO 1 or VIDEO 2 jacks. Refer to the operation manual supplied with the unit for farther information on the operation.

1 2 3 FUNCTION

4 5 6

7 8 9

>10 10/0

Press FUNCTION repeatedly until
VIDEO 1 or VIDEO 2 that you connected
	Other
the unit to appears on the front panel
display.
Each time you press FUNCTION, the mode	Operations
of the system changes in the following
sequence.
DVD t VIDEO 1 t VIDEO 2 t
TUNER t DVD...

59