Sony DAV-S800 68

•REAR

—BEHIND [A] (LOW), BEHIND [A] (HIGH), SIDE [A] (LOW), SIDE [A] (HIGH), BEHIND [B] (LOW), BEHIND [B] (HIGH), SIDE [B] (LOW), SIDE [B] (HIGH): Specify the position, if the speakers are used with speaker stands [A] or without the speaker stands [B], and height to implement the Digital Cinema Surround modes in the “Virtual Multi Dimension” sound field (page 48) properly.

—NONE: Select this if no rear speaker is used.

•SUBWOOFER

—YES

Notes

•When you select an item, the sound cuts off for a moment.

•Depending on the settings of other speakers, the subwoofer may output excessive sound.

Specifying the rear speaker position

and height

If you select anything other than “NONE” in “REAR,” specify the position and height of the rear speakers. The default setting is underlined.

BEHIND [A]	Select this if the rear speakers
(LOW) or (HIGH)	are located in section B
	attached with the speaker
	stands [A], and if the height is
	in section D, select (LOW) or
	in C, select (HIGH).

SIDE [A]	Select this if the rear speakers
(LOW) or (HIGH)	are located in section A
	attached with the speaker
	stands [A], and if the height is
	in section D, select (LOW) or
	in C, select (HIGH).

BEHIND [B]	Select this if the rear speakers
(LOW) or (HIGH)	are located in section B
	without the speaker stands [B],
	and if the height is in section
	D, select (LOW) or in C,
	select (HIGH).

SIDE [B]	Select this if the rear speakers
(LOW) or (HIGH)	are located in section A
	without the speaker stands [B],
	and if the height is in section
	D, select (LOW) or in C,
	select (HIGH).

These parameters are not available when “REAR” is set to “NONE.”

Position diagram

		90
A	45	A
B	45	B
	20

Height diagram

C C