1
2 Press X or x repeatedly to select “SPEAKER SETUP,” then press ENTER or c.
3 Press X or x repeatedly to select “TEST TONE,” then press ENTER or c.4 Press X or x repeatedly to select “ON,” then press ENTER.You will hear the test tone from each speaker in sequence.
5 From your listening position, adjust the value of “BALANCE” and “LEVEL” using C/X/x/c.
When selecting “BALANCE,” the test tone is emitted from both left and right speakers simultaneously.
When selecting “LEVEL,” the test tone is emitted from only the speaker which you are adjusting.
6 Press ENTER when you have finished making adjustments.7 Press X or x repeatedly to select “TESTTONE,” then press ENTER.8 Press X or x repeatedly to select “OFF,” then press ENTER.Note
When you adjust the speaker settings, the sound cuts off for a moment.
Tip
To adjust the balance or the level without listening to the test tone, select “BALANCE” or “LEVEL” in step 3 and press ENTER. Then adjust the balance or level using X/x and press ENTER.
You can set the speakers by using the AMP menu that is displayed in the front panel display.
C/X/x/c/ | Settings | |
and | ||
ENTER | ||
Adjustments | ||
| item you want to set appears in the | ||
AMP MENU |
| |
| 1 Press AMP MENU repeatedly until the |
| |
| front panel display. |
| |
• SP. SETUP |
| |
Sets the speaker size, distance, and place. |
| |
• LEVEL |
| |
Sets the balance and level of the each |
| |
speaker, and turns on/off the test tone. |
|
2 Press X or x to select the desired item, then press C or c to select the desired setting.
You can set the following items:
• SP. SETUP
CENTER | YES (yes) |
(centre speaker) | NO (no) |
| |
|
|
SURR. | YES (yes) |
(surround speakers) | NO (no) |
| |
|
|
F.D. | 1.0 to 7.0 metres |
(front speakers |
|
distance) |
|
|
|
continued