Press "/1 on the remote. The system enters standby mode and the STANDBY indicator lights up in red. To turn off the system completely, remove the mains lead from a wall outlet.
While playing a disc, do not turn off the system by pressing "/1 on the system. Doing so may cancel the menu settings. When you turn off the system, first press x to stop playback and then press "/1 on the remote.
Tip
If a disc is already loaded to the system, you can play it back simply by pressing the H. The function changes to DVD and playback starts
Press "/1 on the system or "/1 on the remote once.
Tip
While the system is in standby mode, the STANDBY indicator on the system lights up.
To cancel standby mode
Press "/1 on the remote once.
To save power on the subwoofer (Auto power on/off function)When input signals cease for a few minutes while the subwoofer is turned on, the ON/ STANDBY indicator on the subwoofer turns red, and the subwoofer enters power saving mode. The subwoofer automatically turns back on when an input signal is received. To turn off this function, slide the POWER SAVE switch on the rear panel of the subwoofer to OFF.
Note
If you turn down the volume level of the system too low, the Auto power on/off function may activate, and the subwoofer will enter power saving mode.
Z
|
| Playing |
./> | X | Discs |
|
| |
H | x |
|
| MUTING |
|
VOLUME +/–
To | Press |
Stop | x |
|
|
Pause* | X |
|
|
Resume play after pause | X or H |
|
|
Go to the next chapter, | > |
track, scene, or file in |
|
continuous play mode |
|
|
|
Go back to the preceding | . |
chapter, track, scene, or file |
|
in continuous play mode |
|
|
|
Stop play and remove the | Z |
disc |
|
|
|
Mute the sound | MUTING. To cancel |
| muting, press it again |
| or VOLUME + to |
| adjust the sound |
| volume. |
|
|
* You cannot pause during JPEG playback.
Notes
•If there is no disc in the system, “READY!” appears on the front panel display.
•If DVD playback is paused for approximately one hour, the system automatically turns off.