Resuming Playback from the Point Where You Stopped the Disc

(Resume Play)

When you stop the disc, the system remembers the point where you pressed x and “RESUME” appears in the front panel display. As long as you do not remove the disc, Resume Play will work even if the system enters standby mode by pressing "/1.

H x

1 While playing a disc, press x to stop playback.

“RESUME” appears in the front panel display, so you can restart the disc from the point where you stopped the disc.

If “RESUME” does not appear, Resume

Play is not available.

2 Press H.

The system starts playback from the point where you stopped the disc in Step 1.

Notes

•Depending on where you stop the disc, the system may not resume playback from exactly the same point.

•The point where you stopped playing is cleared if:

–you change the play mode.

–you change the setting on the Setup Menu.

Tip

To play from the beginning of the disc, press x twice, then press H.

24GB

Using the DVD’s Menu

A DVD is divided into a lot of sections, which make up a picture or music feature. These sections are called “titles.” When you play a DVD which contains several titles, you can select the title you want using DVD TOP MENU/ALBUM–.

When you play DVDs that allow you to select items such as the language for the subtitles and the language for the sound, select these items using DVD MENU/ALBUM+.

 

Number

 

buttons

DVD TOP

DVD MENU/

MENU/

ALBUM+

ALBUM–

 

 

C/X/x/c/

 

ENTER

1 Press DVD TOP MENU/ALBUM– or DVD MENU/ALBUM+.

The disc’s menu appears on the TV screen.

The contents of the menu vary from disc to disc.

2 Press C/X/x/c or the number buttons to
select the item you want to play or change.
3 Press ENTER.

Note

If the DVD top menu or a DVD menu is displayed during DVD playback for approximately one hour, the system automatically turns off.