Using the surface units. | GEAppliances.com |
Throughout this manual, features and appearance may vary from your model.
Safety
Be sure you turn the control knob to OFF when you finish cooking.
How to Set
Push the knob in and turn in either direction to the setting you want.
At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.
A HOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cooled to approximately 150°F.
Indicator light will:
■come on when the unit is hot to the touch.
■stay on even after the unit is turned off.
■glow until the unit is cooled to approximately 150° F.
The WM (warm) setting on the right REAR surface unit keeps already heated food warm until ready to serve.
Instructions Operating Instructions Care
Using the Bridge Burner
To use the bridge burner, turn the control knob to the BRIDGE BURNER settings.
For full bridge burner operation, turn on the rear burner.
To use only the front burner, turn the control knob to the FRONT BURNER settings.
Dual Surface Unit Control Knob
The dual surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.
To use the small (5 or 6 inch) surface | 9" 6" |
unit, turn the control knob to the SMALL BURNER settings.
To use the large (8 or 9 inch) surface unit, turn the control knob to the LARGE BURNER settings.
7
