Listening to the Radio

Preset radio stations in the system’s memory first (see “Presetting Radio Stations” on page 57).

DISPLAY

"/1

FUNCTION

BAND

STEREO/

MONO

PRESET

TUNING –/+

–/+

x

 

 

VOLUME +/–

1 Press FUNCTION repeatedly until FM or AM appears in the front panel display.

The last received station is tuned in.

FM

m

ST

FM

MHz

2 Press PRESET + or – repeatedly to select the preset station you want.

Each time you press the button, the system tunes in one preset station.

Each time you press BAND, the band toggles between AM and FM.

3 Adjust the volume by pressing VOLUME +/–.To turn off the radio

Press "/1.

To listen to non-preset radio stations

Use manual or automatic tuning in Step 2.

For manual tuning, press TUNING + or – on the remote repeatedly.

For automatic tuning, press and hold TUNING + or – on the remote. Press TUNING + or – when you stop the automatic tuning.

Tips

•If an FM program is noisy, press STEREO/MONO on the remote so that “MONO” appears in the front panel display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.

•To improve reception, reorient the supplied aerials.

To check the frequency or sound field

Press DISPLAY repeatedly.

Each time you press DISPLAY, the front panel display changes as follows:

frequency t sound field t frequency...

58GB