Satellite Tuner

Manufacturer

Code number

SONY

201, 202, 203

 

 

AMSTRAD

204, 205

 

 

BSKYB

221

 

 

GRUNDING

218, 219

 

 

HUMAX

205, 206

 

 

NOKIA

210, 212, 213, 223

 

 

PACE

207, 208, 209, 211, 221, 222,

 

223

 

 

PANASONIC

214

 

 

PHILPS

215, 216, 217, 218, 219, 223

 

 

THOMSON

216, 220, 223

 

 

To control the TV

You can control the TV by using following buttons.

By pressing

You can

TV [/1

Turn the TV on or off.

 

 

TV/VIDEO*

Switch the TV’s input source

 

between the TV and other input

 

sources.

 

TV VOL +/–* Adjust the TV volume.

 

 

TV CH +/–*

Select the TV channel.

Number buttons* Select the TV channel.

*To use these number buttons, set the remote to the TV mode by pressing the TV button. To cancel the TV mode, press the TV button again.

You can select the TV channels by using the number buttons.

To select the TV channels, press the number buttons, then ENTER.

Note

Depending on the TV, CATV, or satellite tuner, you may not be able to use the remote control or some of the above buttons.

The TV mode turns off when you do not operate the remote for 10 seconds.

Using the THEATRE SYNC Function

THEATRE SYNC allows you to turn on your SONY TV and this system, changes the system mode to “DVD,” and then switches the TV’s input source you set with one button push.

 

THEATRE

TV

SYNC

TV CH +

TV/VIDEO

 

ALBUM –/+

Number buttons

CLEAR

With cover opened.

Preparing for the THEATRE SYNC function

Register the TV’s input source connected to this system.

Press and hold TV/VIDEO while entering the code for the TV’s input source connected to this system (see the table) using the number buttons.

The TV’s input source is selected.

If you successfully set the TV’s input source code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes 5 times quickly.

Set your TV’s input to the input you used to connect the system. For details, see the instructions of your TV.

70GB