Enjoying the Sound of Other Components

FUNCTION

X/x/c

ENTER

AMP MENU

With cover opened.

You can enjoy the sound of other components with this system. Connect the satellite receiver or components with a high audio output level (including 2V output components, such as MD decks, etc.) to the VIDEO 1/SAT 1 or VIDEO 2/ SAT 2 jacks, and perform the following to prevent distortion occurring.

Refer to the operation manual supplied with the components for further information on their operation.

Lowering the input sensitivity of the VIDEO 1/SAT 1 jack1 Press FUNCTION repeatedly until “VIDEO1” appears in the front panel display.

If “SAT1” appears, the lower input sensitivity is already set and the following steps are unnecessary.

Each time you press FUNCTION, the system mode changes in the following sequence:

DVD t FM t AM t VIDEO1 (SAT1) t VIDEO2 (SAT2) t TV t DVD t ….

2 Press AMP MENU.
3 Press X/x repeatedly until “SETVIDEO1” blinks in the front panel display, then press ENTER or c.4 Press X/x to select “SET SAT1” (“SAT1” blinks) in the front panel display.

The input sensitivity is lowered.

5 Press ENTER or AMP MENU.

The AMP MENU turns off.

Note

•When connecting a component to the VIDEO 2/SAT 2 jack, select “VIDEO2” in step1, “SET VIDEO2” in step 3, and “SET SAT2” in step 4.

•If you select “SET VIDEO1(2)” in step 4, the operation is canceled and the mode display (the mode of the system in step 1) remains as “VIDEO1(2).”

Operations Other

75GB