Step 5: Inserting a disc or a “Memory Stick Duo”
DiscA new 8 cm
b Notes
• Remove dust or fingerprints from the disc beforehand, using a soft cloth (p.99).
1 Check that the power of your camcorder is on.
Set the disc with the label side facing out when using a
2 Turn the disc cover OPEN switch in the direction of the arrow (OPEN B).
[PREPARING TO OPEN] appears on the LCD screen.
The disc cover slightly opens automatically.
4 Close the disc cover.
[DISC ACCESS] appears on the LCD screen.
It may take some time for the camcorder to recognize the disc.
xPickup lens
When the disc cover opens slightly, open it further.
Disc cover OPEN switch
ACCESS lamp (Disc)
A screen appears to ask whether you will use [DISC SELECT GUIDE]. Using [DISC SELECT GUIDE] lets you format the disc by following the guidance on the screen. If you do not want to use it, proceed to step 5.
xYou can start recording immediately after [DISC ACCESS] disappears from the LCD screen. You do not need to proceed to steps after step 5.
5 Touch the option that is right for you on the screen.
x3 Set the disc with the recording side facing your camcorder, then press the center of the disc until it clicks.
Select the recording format, [VIDEO] or [VR] (p. 12), then touch .
26