Sony Tips, Notes, zTips, Notes, Notes, FADER, bNotes, bNotes, bNotes, Fading in, Fading out, WHITE FADER, BLACK FADER, 2Press START/STOP, appears on the screen

bNotes

•Set [WHITE BAL.] to [AUTO] or adjust the color in [ONE PUSH] under white or cool white fluorescent lamps.

•When you select [ONE PUSH], keep framingwhite object while is flashing quickly.• flashes slowly if [ONE PUSH] could not be set.•When [ONE PUSH] was selected, if keepsflashing after touching , set [WHITE BAL.] to [AUTO].•If you set [WHITE BAL.], [SCENE SELECTION] is automatically set to [AUTO].

zTips

•If you changed the battery pack, or moved your camcorder to or from outdoors when [AUTO] was selected, aim your camcorder at a nearby white object with [AUTO] for about 10 seconds for better color balance adjustment.

•If you changed the [SCENE SELECTION] setting or moved your camcorder to or from outdoors during white balance setting with [ONE PUSH], you need to repeat the [ONE PUSH] operation.

COLOR SLOW SHTR (Color Slow Shutter)

When you set [COLOR SLOW SHTR] to [ON], you can record an image brighter in color even in dark places.

appears on the screen.To cancel [COLOR SLOW SHTR], touch [OFF].

bNotes

•Adjust the focus manually ([FOCUS], p. 92) when it is hard to focus automatically.

•The shutter speed of your camcorder changes depending on the brightness, which may result in a slowdown of the motion of the image.

S. NIGHTSHOT PLS (Super NightShot plus)

The image will be recorded at a maximum of 16 times the sensitivity of NightShot plus recording if you set [S. NIGHTSHOT PLS]

to [ON] while the NIGHTSHOT PLUS switch (p. 41) is also set to ON.

appears on the screen.

To return to the normal setting, set [S. NIGHTSHOT PLS] to [OFF].

bNotes

•Do not use [S. NIGHTSHOT PLS] in bright places. This may cause a malfunction.

•Do not cover the infrared port with your fingers or other objects (p. 131).

•Remove the conversion lens (optional).

•Adjust the focus manually ([FOCUS], p. 92) when it is hard to focus automatically.

•The shutter speed of your camcorder changes depending on the brightness, which may result in a slowdown of the motion of the image.

FADER

You can record a transition with the following effects adding to the interval between scenes.

1Select the desired effect in [STBY] (during fading in) or [REC] (during fading out) mode, then touch .

2Press START/STOP.The fader indicator stops flashing and disappears when the fade is complete.To cancel the fader before starting the operation, touch [OFF] in step 1.If you press START/STOP, the setting is cleared.

STBY	REC
Fading out	Fading in

WHITE FADERBLACK FADER

Camcorder Your Customizing

Continued , 95