Recording (Continued)
Movies
1 Turn the POWER switch A until
the 
(Movie) lamp lights up.
2 Press START/STOP B (or C).
[STBY] t [REC]
Still Images
1 Turn the POWER switch A until
the
(Still) lamp lights up.
2 Press PHOTO F lightly to adjust the focus A (a beep sounds), then press it fully B (a shutter click sounds).
To stop recording, press START/STOP again.
Flashing t Lights up
appears next to 
. When 
disappears, the image has been recorded.
bNotes
• You cannot record still images on a disc.
zTips
•See page 11 for the recordable time of movies, and page 77 for the number of recordable still images.
•You can record still images by pressing PHOTO F during movie recording (Dual Rec, p. 36).
•
appears when [
INDEX SET] is set to [ON] (the default setting) during movie recording (p. 76).
•A frame is shown on the detected face, and the detected face image is sharpened automatically when [FACE DETECTION] is set to [ON] (
) (the default setting) (p. 76).
•You can switch recording between movies and still images by touching 
(HOME) D (or E) t
(CAMERA) t [MOVIE] or [PHOTO].
•You can create still images from recorded movies (p. 49)
34