•When you select [ONE PUSH], keep framing
white object while is flashing quickly.
• flashes slowly if [ONE PUSH] could not be set.
•When [ONE PUSH] was selected, if keeps
flashing after touching , set [WHITE BAL.] to [AUTO].
•If you set [WHITE BAL.], [SCENE SELECTION] is automatically set to [AUTO].
zTips
•If you changed the battery pack, or moved your camcorder to or from outdoors when [AUTO] was selected, aim your camcorder at a nearby white object with [AUTO] for about 10 seconds for better color balance adjustment.
•If you changed the [SCENE SELECTION] setting or moved your camcorder to or from outdoors during white balance setting with [ONE PUSH], you need to repeat the [ONE PUSH] operation.
COLOR SLOW SHTR (Color Slow Shutter)
When you set [COLOR SLOW SHTR] to [ON], you can record an image brighter in color even in dark places.
appears on the screen.
To cancel [COLOR SLOW SHTR], touch [OFF].
bNotes
•Adjust the focus manually ([FOCUS], p. 86) when it is hard to focus automatically.
•The shutter speed of your camcorder changes depending on the brightness, which may result in a slowdown of the motion of the image.
SUPER NIGHTSHOT
The image will be recorded at a maximum of 16 times the sensitivity of NightShot recording if you set [SUPER NIGHTSHOT] to [ON] while the NIGHTSHOT switch (p. 36) is also set to ON.
appears on the screen.
To return to the normal setting, set [SUPER NIGHTSHOT] to [OFF].
bNotes
•Do not use [SUPER NIGHTSHOT] in bright places. This may cause a malfunction.
•Do not cover the infrared port with your fingers or other objects (p. 124).
•Remove the conversion lens (optional).
•Adjust the focus manually ([FOCUS], p. 86) when it is hard to focus automatically.
•The shutter speed of your camcorder changes depending on the brightness, which may result in a slowdown of the motion of the image.
FADER
You can record a transition with the following effects adding to the interval between scenes.
1Select the desired effect in [STBY] (during fading in) or [REC] (during fading out) mode, then touch .
2Press START/STOP.
The fader indicator stops flashing and disappears when the fade is complete.
To cancel the fader before starting the operation, touch [OFF] in step 1.
If you press START/STOP, the setting is cleared.
STBY | REC |
Fading out | Fading in |
WHITE FADER
BLACK FADER
Camcorder Your Customizing
Continued , 89