Cleaning Kit (optional), do not apply the cleaning liquid directly to the LCD screen. Use cleaning paper moistened with the liquid.
xOn adjustment of the touch panel
(CALIBRATION)
The buttons on the touch panel may not work correctly. If this happens, follow the procedure below. It is recommended that you connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor during the operation.
1 Turn on your camcorder.
2 Touch 
(HOME) t 
(SETTINGS) t [GENERAL SET] t [CALIBRATION].
3Touch “×” displayed on the screen 3 times with the corner of a “Memory Stick PRO Duo” or the like. The position of “×” changes.
Touch [CANCEL] to cancel.
If you did not press the right spot, try the calibration again.
bNotes
•Do not use a
•You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.
On handling the casing
•If the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth.
•Avoid the following to avoid damage to the finish:
–Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and sunscreen
–Handling the camcorder with above substances on your hands
–Leaving the casing in contact with rubber or vinyl objects for a long period of time
On the pickup lens
•Do not touch the lens inside the disc cover. Keep the disc cover closed except when inserting and removing the disc, to keep dust out.
•When your camcorder does not work because the pickup lens is dirty, clean it with a camera blower (optional). Do not touch the pickup lens directly during cleaning, because this may cause the camcorder to malfunction.
Pickup lens
About care and storage of the lens
• Wipe the surface of the lens clean with a soft |
| |
cloth in the following instances: |
| |
– When there are fingerprints on the lens | Additional | |
– When the lens is exposed to salty air such as | ||
surface. |
| |
– In hot or humid locations |
| |
at the seaside. | Information | |
• Store in a | ||
| ||
little dirt or dust. |
| |
• To prevent mold, periodically clean the lens as |
| |
described above. It is recommended that you |
| |
operate your camcorder about once a month to |
| |
keep it in optimum state for a long time. |
| |
Cleaning inside the viewfinder |
| |
Remove any dust from inside the |
| |
viewfinder by following the steps below. |
|
1Pull out the viewfinder.
2While pushing in the tab on the bottom of the viewfinder with a
Continued , 117