PUSH button POWER switch
When storing the battery pack
Fully discharge the battery before storing it for an extended period (p. 79).
To use an outside power source
You can operate your camcorder using the power from the wall outlet by making the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case.
Charging time
Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack | Charging time |
115 | |
|
|
125 | |
|
|
155 | |
|
|
220 | |
|
|
Recording time
Approximate time (min.) available when you use a fully charged battery pack.
| Continuous | Typical |
Battery pack | recording | recording |
| time | time* |
80 | 40 | |
(supplied) | 105 | 50 |
|
|
|
115 | 55 | |
| 150 | 75 |
|
|
|
240 | 120 | |
| 310 | 155 |
|
|
|
435 | 215 | |
| 550 | 275 |
|
|
|
•All times measured under the following conditions:
Top: Recording with LCD screen.
Bottom: Recording with viewfinder LCD panel closed.
*Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming.
Playing time |
|
| Getting |
|
|
| |
Approximate time (min.) available when | Started | ||
| LCD panel | LCD panel | |
you use a fully charged battery pack. |
| ||
Battery pack | opened | closed |
|
|
| ||
95 | 120 |
| |
(supplied) |
| ||
|
|
| |
|
|
|
|
135 | 170 |
| |
|
|
|
|
280 | 350 |
| |
|
|
|
|
500 | 620 |
| |
|
|
|
|
On the battery pack
•Before changing the battery pack, slide the POWER switch up to OFF (CHG).
•The CHG (charge) lamp flashes during charging, or the battery information (p. 23) will not be correctly displayed under the following conditions.
–The battery pack is not attached correctly.
–The battery pack is damaged.
–The battery pack is fully discharged. (For Battery Info only.)
•The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder, even when the power cord is disconnected from the wall outlet.
On the charging/recording/playback time
•The recording and playback time will be shorter when you use your camcorder in low temperatures.
•The recording and playback time will be shorter depending on the conditions under which you use your camcorder.
•Times measured with the camcorder at 25°C (77°F). (10 - 30 °C (50 - 86°F) is recommended.)
Continued 11