Functions used for recording/playback, etc.
1
2
3
5
46
7
qa
8 qs
9
0
qd
focus is about 1 cm (about 1/2 inch) for wide angle and about 80 cm (about 2 5/8 feet) for telephoto.
•You can set the [D ZOOM] in case you want to zoom to a level greater than 20 times (p. 42).
To record in dark places (NightShot | |
plus) .................................... |
Set the NIGHTSHOT PLUS switch to ON. ( and [“NIGHTSHOT PLUS”] appear.)
•The NightShot plus uses infrared light. Therefore, do not cover the infrared port with your fingers or other objects.
•Adjust the focus manually ([FOCUS], p. 32) when it is hard to focus automatically.
•Do not use these functions in bright places. This may cause a malfunction.
To adjust the exposure for backlit | |
subjects ................................ |
To adjust the exposure for backlit subjects, press BACK LIGHT to display . To cancel the back light function, press BACK LIGHT again.
To adjust the focus for an off center | |
subject (SPOT FOCUS) ............... | |
See [SPOT FOCUS] on page 32. |
|
Recording
To use zoom ...................... | , |
Move the power zoom lever slightly for a slower zoom. Move it further for a faster zoom.
Wide range of view: (Wide angle)
Close view: (Telephoto)
• You can also use the zoom buttons on the LCD panel . You cannot change the zoom speed with these buttons.
• The minimum distance required between
To fix the exposure for the selected | |
subject (Flexible spot meter) ....... | |
See [SPOT METER] on page 32. |
|
To record in mirror mode ............ | |
Open the LCD panel 90 degrees to the camcorder (), then rotate it 180 degrees towards the subject ().
2
1
22
your camcorder and the subject to get a sharp