Searching for the starting point
Make sure that the CAMERA lamp lights up.
Searching for the last scene of the most recent recording (END SEARCH)
[END SCH] (END SEARCH) will not work once you eject the cassette after you have recorded on the tape.
Touch [PAGE1], then touch [END SCH].60min |
|
|
| 0:00:00 | |||
PAGE1 | PAGE2 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
SPOT |
| FOCUS |
| SPOT |
| DISP | |
FOCUS |
|
|
| METER |
| GUIDE |
|
MENU FADER END EXPO–
SCH SURE
Touch here again to cancel the operation.
The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished.
•[END SCH] will not work correctly when there is a blank section between recorded sections on the tape.
•When the PLAY/EDIT lamp lights up, you can do this operation.
Searching manually (EDIT
SEARCH)
You can search for the start point to start the next recording while viewing the pictures on the screen. The sound is not played back during the search.
1 Touch [PAGE1] [MENU]./, then touch [EXEC].
3 Select [EDITSEARCH] with/, then touch [EXEC].
4 Select [ON] with /, then touch [EXEC] .
| 60min | STBY | 0:00:00 | ||||
|
| EDIT |
|
|
|
|
|
|
|
|
| FN |
| ||
|
|
|
|
|
|
|
|
backward)/ (to go forward) and release it at the point where you want the recording to start.
Reviewing the most recently recorded scenes (Rec review)You can view a few seconds of the scene recorded just before you stopped the tape.
1 Touch [PAGE1]
[MENU].
2 Select (CAMERA SET) with
/, then touch [EXEC].
3 Select [EDITSEARCH] with
/, then touch [EXEC].
4 Select [ON] with /, then26