Searching for a scene by date of recording (Date search)
You can locate the point where the recording date changes.
1Slide the POWER switch down repeatedly to turn on the PLAY/ EDIT lamp.
2Press SEARCH M. to select [DATE SEARCH].
3Press (previous)/(next) to select a recording date.
Each time you press or , your camcorder searches for the previous or next date from the current point on the tape.
60min | 0:00:00:00 |
| 30min |
DATE
SEARCH
To cancel the operation
Press STOP .
•The Date search will not function correctly when there is a blank section between recorded sections on the tape.
Searching for a still image (Photo search)
Your camcorder can search for the still image automatically, regardless of the recording date.
1Slide the POWER switch down repeatedly to turn on the PLAY/
EDIT lamp.
2Press SEARCH M. to select [PHOTO SEARCH].
3Press (previous)/(next)
to select a photo.
Each time you press or , your camcorder searches for the still image before or after the current point on the tape.
| Recording/Playback | |
To cancel the operation | ||
| ||
Press STOP . |
| |
• The Photo search will not function correctly |
| |
if there is a blank section between recorded |
| |
sections on the tape. |
|
Playing back still images in sequence (Photo scan)
You can locate still images one after another and display each image for 5 seconds automatically.
1Slide the POWER switch down repeatedly to turn on the PLAY/ EDIT lamp.
2Press SEARCH M. to select [PHOTO SCAN].
3Press (previous)/(next) .
To cancel the operation
Press STOP .
• The Photo scan will not function correctly if there is a blank section between recorded sections on the tape.
29