Chapter 21: Remote Access

21.2 Windows Network Configuration

In this section you will determine basic information about your network

Make sure that the DVR is properly connected to the router/modem and that you have a Windows computer connected to the same router.

Follow these steps to determine the basic information about your network:

1.Press the Windows key and the R key at the same time on your computer’s keyboard. Type cmd and press the Enter key.

2.In the command prompt window, type ipconfig and press Enter. Find the section called “Ethernet adapter Local Area Connection” or “Wireless LAN Adapter Wireless Network Connection.”

3.Find the IPv4 Address (it may be named “IP Address” in some versions of Windows). Write down this number.

78

Page 78
Image 78
Night Owl Optics DVR Security Kit, Elite Series 8CH, PRO Series 8CH manual Windows Network Configuration