Night Owl Optics PRO Series 8CH manual Trigger Screen, Alarm output duration This has no function

Chapter 15: Advanced Menu

15.1.1.3 Trigger Screen

The Trigger Screen allows you see what has triggered an alarm.

To access the Trigger Screen, select the Advanced button, select Alarm from the list on the left side of the screen, and then select Motion. Select Settings in the Trigger column for the channel you are configuring.

•Record: Instructs the DVR to start recording when motion.

•Snapshot: Saves a picture of what has triggered the alarm.

•Send Email: Sends a snapshot to an email address that has been configured.

•Alarm output: This has no function.

•Alarm output duration: This has no function.

•Buzzer: Causes the DVR to beep if alarms have been detected.

•Pop-up Screen: Enlarges the channel to the full screen of the channel that has detected the alarm.

•Pre-Record:Select the duration that the DVR will record before an alarm is triggered.

•Post-Record:Select the duration that the DVR will record.

•PTZ: If you have a PTZ (Pan-Tilt-Zoom) camera connected, select whether you would like the camera to move to a preset point.

47