Connecting an analog VCR to the computer via your camcorder (DV format models only)
— Signal convert functionDV Interface
A/V (audio/video)
to i.LINK (IEEE1394) connector
i.LINK cable (optional)
A/V connecting cable
(supplied)* (White)
(Yellow)
functions Other
jack (Red)
AUDIO/VIDEO jacks
: Signal flow
VCR (analog)
S video plug (Black)
*The supplied A/V connecting cable has a video plug and S video plug. You need to set which plug to use depending on the equipment to be connected. For details, refer to the separate Camera Operations Guide supplied with your camcorder.
You can convert an analog signal output from an analog device such as a VCR to a digital signal and transfer it to a digital device, such as a computer, via your camcorder.
Select the (STANDARD SET) menu, [DISPLAY], then [LCD PANEL] (default setting). For details, refer to the separate Camera Operations Guide supplied with your camcorder.
To carry out this operation, you need a software application (such as ImageMixer Ver.1.5 for Sony) that can read a video signal installed on your computer.
ImageMixer Ver.1.5 for Sony is used to describe the operation in this section.
,continued
Other functions 37